Breast cancer ribbon dangle and studs silicone earring mold handmade using acrylic earring pieces for resin earrings/ jewellery/ jewellery/ earrings/ craft/ diy earrings.
Dangle: 15mm width 30mm heig
Studs: 12mm width 20mm heigh
To prolong the use of the mold, please avoid direct open flame to the mold. If you wanna get rid of bubbles in your resin, you can pre-heat a little of your resin in the mixing cup or use a releasing agent to aid. Store your mold flat, on a level surface and away from direct sunlight.
Please note that if you are using resin that contains corrosive piperazine base (eg. N-[2-(1-piperazinyl)ethyl]-1,2-Ethanediamine, N-aminoethylpiperazine, etc), these resin generally do not suit our mould. The lifetime of pouring is limited to 10 times or less, think twice before you buy.
Recommended resin: Just Resin Diamond Cote 1:1 AB epoxy resin or Liquid Gloss 2 part epoxy resin.
Happy making. 😊