45mm height 28mm width snake silicone earring mold handmade using acrylic earring pieces for resin earrings/ jewellery/ jewellery/ earrings/ craft/ diy earrings.
To prolong the use of the mold, please avoid direct open flame to the mold. If you wanna get rid of bubbles in your resin, you can pre-heat a little of your resin in the mixing cup or use a releasing agent to aid. Store your mold flat, on a level surface and away from direct sunlight.
Please note that if you are using resin that contains corrosive piperazine base (eg. N-[2-(1-piperazinyl)ethyl]-1,2-Ethanediamine, N-aminoethylpiperazine, etc), these resin generally do not suit our mould. The lifetime of pouring is limited to 10 times or less, think twice before you buy.
Recommended resin: Just Resin Diamond Cote 1:1 AB epoxy resin or Liquid Gloss 2 part epoxy resin.
Happy making. 😊